Communicator FireCom
Messages to the security company- Sends events via the built-in LAN module or cellular 4G modem.
- Events are sent via available communication channels with the selected priority.
- Any CMS can receive reports if they have TRIKDIS software/IP receiver or any other manufacturer’s IP receiver supporting SIA DC-09 IP protocol.
- Prioritizing the transmission of events to the CMS: messages are first transmitted to the CMS and only then to Protegus 2.
- Possibility to send event reports to CMS of two different security companies.
- Event messages are sent in Contact ID or SIA codes.
- Calls selected phone numbers (up to 8 users).
- Sends SMS messages about events.
- “Push” and special sound event notifications using the Protegus 2
- Remote temperature monitoring.
- Via Protegu 2s app.
- By calling the device‘s phone number.
- Via SMS messages.
- Quick and easy installation.
- Device configuration either using a USB cable or remotely using TrikdisConfig
- Remote updating of firmware.
- Two access levels (types of accounts) for setting parameters: for the installer and for the administrator.
- 3 relay outputs (1 A, 30V DC).
- Input “FLOOP” is intended for connection of two-wire fire detectors.
- 10 I/O terminals can be set as an input (IN) or output (OUT) terminal. Selectable Input (IN) types: NC, NO, EOL, EOL-T, ATZ, ATZ-T. Resistors of different ratings can be used in EOL and ATZ circuits.
- With iO expander modules, the number of IN inputs can be expanded up to 32 units, and the number of OUT outputs can be expanded up to 16 units.
- RS485 bus is used to connect iO series expander modules.
